Run a ForceFrame Test

This brief guide covers the steps required to run a ForceFrame test.

If testing for the first time, refer to the ForceFrame Starter's Guide before completing your first test.

	1.	Log In Log in to the ForceFrame App. Your login credentials for the app are the same credentials as your VALD Hub account.
	2.	Zero Sensors ForceFrame zeroes itself during start up. Ensure nothing is touching the force sensors before turning the ForceFrame on, or when you click Zero Now.
	3.	Connect Device Connect your ForceFrame to your PC or iOS device. Connect your PC via USB, or iOS device via Bluetooth.
	4.	Confirm Device Click Device then select your ForceFrame.
	5.	Select Profile Click Profile to select your athlete/client, or Add New Profile.
	6.	Confirm Test Click Program to select the test type you wish the individual to perform.
	7.	Confirm Position Ensure the individual is setup in the correct starting position.
	8.	Record Position (Optional) Record test specific information to standardise future tests.
	9.	Start Recording Click the Start button to commence the test recording.
	10.	Perform Test Instruct the individual to begin the test and perform the required number of reps.
	11.	Finish Recording Click the Finish button to complete the test recording.
	12.	Upload Result Check your test data and remove (unselect) any unwanted reps prior to uploading to VALD Hub. Click the Upload button to View Test Results in VALD Hub.